Hustler Super Z Diesel
 E-Mail | |
|
Get Map | |
|
Hours | |
|
Parts | |
|
Rentals | |
|
Service | |
|
Sharpening Services | |
|
Home | |
34 HP Caterpillar Diesel Engine
- Caterpillar certified
- Only hydraulic drive deck in class
- Best warranty in the industry
- Largest fuel capacity in class
- Largest cutting-height range among mid-mount mowers
- New, improved deck design with better quality of cut and distribution
- Auto-reversing fans automatically clear radiator and oil-cooler core
PRICING**
** Prices and Specs subject to change. Please or phone Woodbury Saw & Mower for latest information.
| Super Z 34 HP Caterpillar Diesel w/ 60 inch cut | $15,999 |
| Super Z 34 HP Caterpillar Diesel w/ 72inch cut | $16,200 |
Hustler Turf Equipment runs specials such as Financing and Rebates. Please or check our the Hustler Turf Equipment Web Site for more information
The Hustler Super Z™ Diesel Specifications
|
Engine Specifications
|
|
| Manufacturer Model | Kawasaki 3013C |
| Horsepower |
34 |
| No. of Cylinders |
3 |
| Displacement |
91 cu in (1490 cc) |
| Max. Torque | 70.8 ft lbs @1800 |
| Starter
|
12-volt,solenoid shift positive engagement. |
| Charging System | 12-volt, 65-amp. |
| Fuel
|
Number 2 diesel |
| Fuel
Filter |
Replaceable, automotive-type. |
| Air Filter | Heavy-duty air cleaner and centrifugal precleaner to extend the service interval for excessive, dirty applications and improved performance |
| Cooling
|
liquid cooled. Dual high performance electric fans |
| Governor | Mechanical |
|
TRACTION DRIVE SYSTEM
|
|
| Type |
Dual hydrostatic. Individual pumps power two direct-drive wheel motors. Hydrostatic system operates on 10W40 motor oil. |
| Transmission Drive | (oil) cooler for increased system life |
| Pumps
|
Two variable displacement, axial piston type. Each pump powers one drive-wheel motor. Hydro_Gear BPM |
| Pump Drive
|
Micro-V-belt drive from engine crankshaft. |
| Final
Drive |
Direct-drive high-torque wheel motors. One for each drive wheel. Hydro-Gear BPM |
| Filter
|
25 micron, spin-on type. |
| Ground
Speed |
infinitely
variable Transport: 0-15 mph (0-14.48 kph) forward Mowing: 0-10 mph (0-16.09 kph) forward 0-7.5mph (0-12.07 kph) reverse |
| Steering
|
Twin-lever steering provides independent control of each drive wheel. Speed, forward, reverse, brake, and turns are all controlled with hand-operated controls. |
| Turning
Radius |
True zero degree. Turns within its own length. Counter-rotating, independent drive wheels. |
|
BRAKES
|
|
| Service
|
Hydrostatic dynamic braking. |
| Parking
|
Internal motor brake. When steering levers are placed in neutral position, integral park brakes are automatically engaged. |
| Mower Drive | Hydraulic pump drive from engine with electric clutch. Hydraulic motor mounted in deck. |
|
TIRES
|
|
| Front: | 15 x 6.50 - 6, rib tread |
| Drive: | 26 x 12.00 - 12 turf tread. |
|
CAPACITIES
|
|
| Fuel System | 19 US gal (68.1 l). |
| Hydraulic
Oil |
3 US gal (11.4 l) |
| Engine Coolant | 3 US gal (11.4 l) |
| DIMENSIONS | |
| Height | 56.5
in (143.5 cm) ROPS down 72 in (182.9 cm) ROPS up |
| W/60 in Deck | Length
90 in (238.8 cm) Overall width 62 in (157.5 cm) w/ discharge chute up Tire-to-tire width 62 in (157.5 cm) Weight 1840 lbs (835kg). |
| W/72 in Deck | Length
94 in (238.8 cm) Overall width 70.5 in (179 cm) w/ discharge chute up Tire-to-tire width 65 in (165.1 cm) Weight 1880 lbs (853 kg). |
| SAFETY FEATURES: | Operator presence system connected to brake and deck clutch. Certified, folding 2-post ROPS. Stabilizer rollers at rear of tractor. |
| SEAT: | Molded-vinyl, suspension seat with armrests. Fore and aft adjustment with lumbar & tilt adjustments |
| CONSTRUCTION: | Mainframe
is 1.5 in x 3 in x .187 in (3.8 cm x 7.62 cm x .47 cm) rectangular
steel tubing. Drive motors mounted to .179 in (.45 cm) welded steel.
Front caster wheels mounted with roller bearings on each wheel. Front caster forks are .5 in (1.27 cm) steel. |
| DECK LIFT: | Foot-operated deck height adjustment. Pin for setting height, detent transport position. |
| CONTROLS: | Hand-operated choke/throttle, ignition switch, electric mower clutch. Integrated parking brakes. |
| INDICATORS: | Hour meter, warning lights (cooling temp, engine oil pressure, charge), audio (temp) |
| CUP HOLDER: | Two cup holders molded into the left side fuel tank. Accommodates nearly any cup size including Big Gulp. |
| 60" & 72" Side-Discharge Decks | |
| Type | Free-floating mower using three blades with center blade to the front. Mower is suspended at corners. Includes deck-mounted rollers to iprove flotation in rolling and uneven terrain. |
| Deck Lift | Raise and lower deck from driver's seat with simple foot-operated deck height adjustment. Pin for setting height, transport position. Change cutting heights, hop curbs and trailer more easily. |
| Construction | .125 in. (.375 cm)welded steel. Solid 1in. x .375in. (2.5cm x .95cm) steel bars reinforce impact areas on trim edges. .187in. x .375in. (.47cm x .95 cm) in box-section reinforced front edge. Reinforcements welded onto spindle mount areas. Steel deck housing is 5.25in. (13.34 cm) deep to provide room for high-capacity mowing |
| Cutting Heights | Foot-operated deck height adjustment. Pin for setting height, tetent for transport position. Height adjustment in .25 in. increments from 1 in. to 7 in.(2.5 cm to 17.8 cm) |
| Blade Tip Speed | 60
in.: 18,450 fpm 72 in.: 18.850 fpm |
| Blade Drive | V-belt drive in all three spindles. Spring tension idler pulleys |
| Spindles | Machine Ductile housing 1 in. (2.5 cm) diameter high carbon steel shafts and sealed ball bearings. |
| Floatation | Suspended mower floats on four spring-assisted chains. Anti-scalp wheels are standard |
| Discharge Chute | Over-center design allows for chute to be folded up for improved trailering or to pass thru gates, etc. |
| Trim Capacity (left side) | 60 in:
6 in (15.2 cm) 72 in: 8 in (20.3 cm) |
| Warranty | 2-year
parts and labor Lifetime warranty on tractor frame Lifetime warranty on the leading edge of the deck 3-years on Caterpillar engine |