Hustler Z

woodbury saw mower e-mialE-Mail
woodbury saw mower directions Get Map
woodbury saw mower hours Hours
woodbury saw mower rentals Parts
woodbury saw mower rentals Rentals

woodbury saw mower sales Sales

 
woodbury saw mower service Service
woodbury saw mower sharpening services Sharpening
Services
woodbury saw mower Home

The Hustler Z™ may look like other mid-mount z-riders, but that’s where the similarities end. Featuring the toughest construction in the industry, the Hustler Z sports the strongest frame, front caster forks, deck, and blade spindles on the market. In fact we offer a lifetime warranty on the tractor frame and the leading edge of the mowing deck.

The 60" side-discharge deck features very-high blade-tip speed, high-lift blades, and 6 anti-scalp wheels to produce a beautiful finish. Mowing heights can be changed from 1" to 5" in 1/4" increments with a simple foot-operated deck lift. Over 12 gallons of on-board fuel capacity keeps you mowing longer than any z-rider in the industry.

Hustler innovation provides an integral park-brake system. When the steering levers are placed in the off (folded-out) position, the park brakes are engaged. This feature makes the starting and stopping sequence much more natural and instinctive. Operator does not have to remember to disengage brake to drive nor engage brake before starting.

  • Toughest frame, front forks, and deck in the industry
  • 12.2 gallon fuel capacity - more than any competitor
  • At 75", the shortest Z in the 60" class
  • 29" seat height - lowest in the industry
  • Twin-lever steering with integral park brake system
    (patent applied for)
  • Over-center discharge chute folds up out of the way for trailering or to pass through gates
  • Simplest maintenance in the industry
  • Wide stance and low center of gravity for unmatched stability on slopes
  • Fuel-efficient, 23HP Kawasaki engine
  • 60" side-discharge deck

PRICING

Hustler Z 23 HP Kawasaki w/ 52 inch cut $8649
Hustler Z 23 HP Kawasaki w/ 60 inch cut $8749
Hustler Z 24 HP Honda w/ 60 inch cut Standard Seat $8999
Hustler Z 24 HP Honda w/ 60inch cut & Suspension Seat $9349
Hustler Z 23 HP Kawasaki w/ 60 inch cut & Suspension Seat $9199
Hustler Z 25 HP Kawasaki w/ 60 inch cut $9249
Hustler Z 25 HP Kawasaki w/ 60 inch cut & Suspension seat $9549
Hustler Z 25 HP Kawasaki w/ 72 inch cut & Suspension seat $9799
Hustler Z 27 HP Kohler w/ 52 inch cut Standard Seat $8999
Hustler Z 27 HP Kohler w/ 72 inch cut & Suspension Seat $9999
Hustler Z 27 HP Kohler w/ 60 inch cut & Suspension seat $9699

** Prices and Specs subject to change. Please or phone Woodbury Saw & Mower for latest information.

Hustler Turf Equipment runs specials such as Financing and Rebates. Please or check our the Hustler Turf Equipment Web Site for more information

The Hustler Z™ Specifications

 
Engine Specifications
 
Kawasaki Kawasaki Honda Kohler
Horsepower
23 25 24 27
No. of Cylinders
2 2 2 2
Diaplacement
41.2 cu in (675 cc) 41.2 cu in (675 cc) 40.9 cu in (670 cc) 44.0 cu in (725 cc)
Compression Ratio
8.1:1 8.1:1 8.3:1 9:1
Max. Torque 39.8 ft lbs @ 2400 rpm 41.0 ft lbs @ 2400 rpm 37.5 ft lbs @ 2500 rpm 32.7 ft lbs @ 3000 rpm
Starter
12-volt,solenoid shift positive engagement.
Ignition Electronic. Charging System 12-volt, 15-amp.
Fuel
Unleaded gasoline with octane rating of 87 or higher.
Fuel Filter
Replaceable, automotive-type.
Cooling
Air cooled. Fly-wheel fan.
Governor Mechanical
 
TRACTION DRIVE SYSTEM
 
Type

Dual hydrostatic. Individual pumps power two direct-drive wheel motors. Hydrostatic system operates on 10W40 motor oil.
Pumps
Hydro-gear BDP10 Two variable displacement, axial piston type. Each pump powers one drive-wheel motor.
Pump Drive
V-belt drive from engine crankshaft.
Final Drive
Ross MB 15 direct-drive high-torque wheel motors. One for each drive wheel.
Filter
40 micron, replaceable spin-on type.
Ground Speed
infinitely variable
0-11 mph (0-17.7 kph) forward
0-5 mph (0-8 kph) reverse.
Steering
Twin-lever steering provides independent control of each drive wheel. Speed, forward, reverse, brake, and turns are all controlled with hand-operated controls.
Turning Radius
True zero degree. Turns within its own length. Counter-rotating, independent drive wheels.
 
BRAKES
 
Service
Hydrostatic dynamic braking.
Parking
Automotive-style drum brakes. When steering levers are placed in neutral position, integral park brakes are automatically engaged.
Mower Drive Single V-belt drive from engine with electric clutch. Spring tension idler for long belt life
 
TIRES
 
Front: 13 x 6.50 - 6, rib tread
Drive: 60 in: 24 x 12.00 - 12, turf tread.
52 in: 23 x 9.50 - 12 turf tread.
 
CAPACITIES
 
Fuel System 12 US gal 45.5 l). Hydraulic Oil
Hydraulic Oil
1.5 US gal (5.7 l)
DIMENSIONS Height 39 in (99 cm)
W/52 in Deck Length 75 in (190.5 cm)
Overall width w/52" deck and discharge chute up 59in (149.86 cm)
Tire-to-tire width 52 in (132.082 cm)
Weight 1160 lbs (526.16kg).
W/60 in Deck Length 75 in (190.5 cm)
Overall width w/60" deck and discharge chute up 62 in (157.48 cm)
Tire-to-tire width 53 in (134.62 cm)
Weight 1190 lbs (539.77 kg).
W/72 in Deck Length 79 in (200.7 cm)
Overall width w/72" deck and discharge chute up 70.5 in (179.07 cm)
Tire-to-tire width 59 in (149.86 cm)
Weight 1230 lbs (557.91 kg).
SAFETY FEATURES: Operator presence system connected to deck and drive clutches. Stabilizer rollers at rear of tractor.
SEAT: Molded-vinyl seat with armrests. Fore and aft adjustment. Optional spring suspension.
  Optional: Molded-vinyl, suspension seat with armrests. Fore and aft adjustment.
CONSTRUCTION: Mainframe is 1.5 in x 3 in x .187 in (3.8 cm x 7.62 cm x .47 cm) rectangular steel tubing. Drive motors mounted to .179 in (.45 cm) welded steel.
Front caster wheels mounted with roller bearings on each wheel.
Front caster forks are .5 in (1.27 cm) steel.
DECK LIFT: Foot-operated deck height adjustment. Pin for setting height, transport position.
CONTROLS: Hand-operated choke/throttle, ignition switch, electric mower clutch. Integrated parking brakes.
INDICATORS: Hour meter, engine warning light.
CUP HOLDER: Two cup holders molded into the left side fuel tank. Accommodates nearly any cup size including Big Gulp.